POLAR S725 - Manual (Page 41)

B 39
Power* on/off
If you start from the Time of day display, repeat steps 1-5.
6.
Scroll up or down until Power is displayed.
7. Press OK to start setting the Power Output. On/OFF starts to flash.
8. Scroll up or down to set Power Output on or off. Press OK.
OFF: Skip the rest of the Power Output settings.
9. C. weight is displayed. Scroll up or down to adjust the chain weight. Press OK.
10. C. length is displayed. Scroll up or down to adjust the chain length.
Press OK.
11. S. length is displayed. Scroll up or down to adjust the span length.
Press OK.
If you are using the wireless Polar Speed Sensor, set the Power off.
You can find more information about the Polar Cadence and Polar Power
Output Sensor on the back cover of this manual.