Porter-Cable SOPHO IPC 100 - Manual (Page 7)

6
If your call doesn’t go through…
Setting Camp On / Callback / Trunk Queuing
<Camp On> For Intercom Call, when you hear ringing, wait for the called party to answer.
For Trunk Queuing, when you hear Dial Tone, begin dialling the telephone number.
<Callback> For Intercom Call, when your phone starts the ringing, lift handset and wait for the called
party to answer.
For Trunk Queuing, when your phone starts the ringing, lift handset, hear Dial Tone and
begin dialling the telephone number.
Set / Answer a Message Waiting
When you set a MW, the called party’s MW Indicator starts to flash, and your MW Indicator is lit Red.
When you answer a MW, the MW Indicator will automatically go off when the called party answers.
Hear Intercom
Busy Tone or
No Answer
Set
8 1 4
MW Key
(SC.851+38)
Your phone’s
Indicator is
flashing in Red
Answer 8 1 4
MW Key
(SC.851+38)
Camp On Key
8
Wait without
hanging up
Wait for the
system to call
you back
<Camp On>
<Callback>
(SC.851+35)
[Lit Red when set]
(Hear Busy Tone,
No Answer, or
Trunk Unavailable)
When Camp On set
8 0 7
Cancelling Camp On / Callback / Trunk Queuing
(SC.851+35)
Camp On Key
Or press the
Camp On Key
5 0