Pelican PL-678 - Manual (Page 7)

Instructions:
1. Make sure your PlayStation®,
PSone TM , or PlayStation®2 is
turned off.
2. Plug your new AfterGlow con-
troller into controller port one. If
you already have a controller and
want to use AfterGlow as a sec-
ond controller, make sure you have
a controller plugged into controller
port one and plug AfterGlow into
controller port two.
3. Because of AfterGlow’s relocated
L2 / R2 buttons you will need to
hold the controller slightly different
than you would a standard
PlayStation® controller. Place your
index finger on the L1 / R1 buttons
5.