PYLE Audio PDSP850 - Manual (Page 2)

Your PYLE PRO series Digital Sampler Processor is
created to provide the stereo audiophile with a
sophisticated control center for sampling the sound
from multiple input sources and directing the signal
to a sound processor or power amplifier for playback.
i – PYLE PRO PDSP 850 Owner’s Manual PYLE PRO PDSP850 Owner’s Manual - 1
Please read this manual throughly before you attempt
to set up and use this PDSP850. It contains a rang of
installation suggestions as well as instructions to
ensure safe usage. Installed properly, you can expect
years of trouble-free service from this product.
MEMORY BANK Mode Selector,
1/2-BANK & 3-BANK
Lets you select to deicde the
BANK mode for memory.
VOLTAGE Selector
REC OUTPUT Jacks
To connect the PDSP850 to a tape
deck for recording the program.
LINE OUTPUT Jacks
To connect the PDSP850 to a
amplifier or mixer.
LINE 2 INPUT Jacks
To connect the high level audio sources,
such as CD players, tape deck, tuner,
or VCR.
PHONO/LINE 1 INPUT Jacks
Let you choose to connect the high
level audio sources (LINE 1), or a
turntable with a magnetic cartridge
(PHONO).
INPUT SELECTION SWITCH - LINE
1/PHONO
Set this switch based on what is
plugged into PHONO/LINE 1 input
jacks.
MIC OUT
To connect the MIC
OUT to the MIC INPUT
of your mixer or
amplifier.
GROUND
For turntables
FEATURES AND CONTROLS
FRONT PANEL
Power On/Off
MIC Input Jack and
SAMPLER MIC
To connect input signal
from microphone and
push on the SAMPLER
MIC switch for making
samples from the
microphone.
INPUT LEVEL Control
Lets you adjust the gain
of the input source.
SAMPLER PAN Control
Lets you adjust the balance
of the recorded sample.
SAMPLER LEVEL Control
Lets you adjust the output
volume of the recorded
sample.
PHONO/LINE 1, OFF, & LINE
2 Source Selection Switch
Let you select the input
source goes through the
PDSP850 to the output units.
SAMPLER MODE
selector, WRITE,
SINGLE, & REPEAT
Let you select to
decide the sampler
function to play.
MEMORY BANK Time
Selector, 4-SEC, 8-SEC,
12-SEC, 16-SEC, or 24-
SEC
Let you select to deicde
the memory time of
sampler.
PITCH Control
Lets you adjust the
pitch of the recorded
sample.
START/STOP Control
Lets you control the start and
stop of the sampling process.
REAR PANEL