Placement, Led status – Panasonic KX-A272 User Manual
Page 6
6 | Operating Instructions
Placement
To get the best performance from the repeater:
•
Select a raised position (on wall etc), which is well within range of the Base
Unit/Cell Station.
•
Avoid positioning the repeater close to objects that will interfere with reception, such
as thick walls, radiators, metal shelving etc.
•
For maximum distance noise-free operation, place your DECT repeater away from
electrical appliances such as TV, radio, personal computer or other telephone
equipment.
•
Keep a minimum distance of 10m between repeaters.
•
If the Green LED flashes - move the repeater closer to the Base Unit/Cell Station or
away from obstructions etc.
LED Status
Red LED (Indicates special states)
Green LED (Indicates registration / communications states)
On/off/blink specification
Definition
On
Repeater is not assigned to any system
Off
Normal Operation
Slow blinking -
“320ms on / 320ms off”
Manual registration mode
Intermittent blinking
“100ms on / 2.4sec off”
Verification mode (Flashes in time with monitor beep
tone)
On/off/blink specification
Definition
On
Repeater successfully registered
Off
Repeater de-powered
Slow blinking -
“320ms on / 320ms off”
Registration process ‘searching’ for Cell Station /
unregistered
Fast blinking -
“200ms on / 200ms off”
Repeater ID programming mode / Site Survey mode
(PBX application only)
QUQX00130YA_01_A 20/1/04 6:40 pm Page 6