Switching the speaker terminals, Using the multi-zone controls, Using other functions 08 – Pioneer SC-1525-K User Manual

Page 63

Advertising
background image

Using other functions

08

63

En

Switching the speaker terminals

If you selected Speaker B at Speaker system setting on
page 85, you can switch between speakers using the
SPEAKERS button. If you selected Normal(SB/FH),
Normal(SB/FW), Front Bi-Amp or ZONE 2, the button
will simply switch your main speaker terminals on or off.
The options below are for the Speaker B setting only.

1

Use SPEAKERS on the front panel to select a

speaker system setting.
As mentioned above, if you have selected Normal(SB/
FH)
or Normal(SB/FW), the button will simply switch
your main speaker terminal (A) on or off.

Press repeatedly to choose a speaker terminal option:

SP

A – Sound is output from the A-speaker

terminals (up to 7 channels (including surround back
channels), depending on the source).

SP

B – Sound is output from the two speakers

connected to the B-speaker terminals. Multichannel
sources will not be heard.

SP

AB – Sound is output from the A-speaker

terminals (up to 5 channels, depending on the
source), the two speakers connected to the B-
speaker terminals, and the subwoofer. The sound
from the B-speaker terminals will be the same as the
sound from the A-speaker terminals (multichannel
sources will be downmixed to 2 channels).

SP

 (off) – No sound is output from the speakers.

Using the MULTI-ZONE controls

The following steps use the front panel controls to adjust
the sub zone volume and select sources. See MULTI-
ZONE remote controls
on

page 64.

1

Press MULTI-ZONE ON/OFF on the front panel.

Each press selects a MULTI-ZONE option:

ZONE 2 ON – Selects your primary (ZONE 2) sub

zone

ZONE 2&3 ON – Select both sub zones

ZONE 3 ON – Selects your secondary (ZONE 3) sub

zone

MULTI ZONE OFF – Switches the MULTI-ZONE

feature off

The MULTI-ZONE indicator lights when the MULTI-ZONE
control has been switched ON.

2

Press MULTI-ZONE CONTROL on the front panel to

select the sub zone(s) you want.
If you selected ZONE 2&3 ON above, you can toggle
between ZONE 2 and ZONE 3.

a.If the video picture deteriorates when this settings is switched ON,

switch it OFF.

b.• When set to a resolution with which the TV (monitor) is not

compatible, no picture is output. Also, in some cases no picture will
be output due to copyright protection signals. In this case, change
the setting.
• When AUTO is selected, the resolution is selected automatically
according to the capacity of the TV (monitor) connected by HDMI.
When PURE is selected, the signals are output with the same
resolution as when input (see About the video converter on page 22).
• If this is set to something other than AUTO, PURE and 480i/576i
analog signals are input, 480p/576p signals are output from the
component output terminals.
• When 1080/24p is selected, depending on the source material the
movement may be unnatural or the picture may not be clear. In this
case, set the resolution to something other than 1080/24p.
• 1080/24p is mainly effective for movie source materials.

c.• If the image doesn’t match your monitor type, adjust the aspect

ratio on the source component or on the monitor.
• This setting is only displayed when 480i/p or 576i/p video signals
are being input.

d.This setting is only displayed when the video signals below are

being input:
• 480i, 576i, 480p, 576p, 720p, 1080i analog video signals
• 480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 1080p24 HDMI video
signals

e.• This setting is valid for component outputs and HDMI output.

• This setting have the effect only for pictures recorded in the
interlaced scan format (480i/576i or 1080i signals).
P.MOTION is disabled when PCINEMA is set to ON.

f. You can’t use this setting when the HDMI or component video

signals are being input.

Note

1 • The subwoofer output depends on the settings you made in Manual speaker setup on page 84. However, if SP

B is selected above, no sound

is heard from the subwoofer (the LFE channel is not downmixed).
• All speaker systems (except Speaker B connections) are switched off when headphones are connected.

SC-1525_UXJCB.book 63 ページ 2010年4月20日 火曜日 午後7時32分

Advertising