Peavey UA 35T II - Manual (Page 4)

4
70V ÒConstant VoltageÓ Distribution System
OUTPUTS 35 W RMS
GND 4 W COM 8W 25V 70V
(12V) (17V)
WIRING DIAGRAM
OUTPUT POWER:
35 watts RMS
POWER BANDWIDTH:
Aux 50 Hz - 20 kHz .6% THD
Mic 50 Hz - 20 kHz .8% THD
Page 50 Hz - 20 kHz .6% THD
FREQUENECY RESPONSE:
Aux 50 Hz - 20 kHz +0, -2 dB
Mic 50 Hz - 20 kHz +0, -2 dB
Page 50 Hz - 20 kHz +0, -2 dB
THD (1 kHz):
Aux <.05%
Mic <.2%
Page <.2%
S/N RATIO (22 kHz BW):
Tone controls flat/input control max
Aux
85 dB (50 ohm input)
Mic 58 dB (150 ohm input)
Page 58 dB (680 ohm input)
TONE CONTROLS:
Bass +/- 10 dB @ 100 Hz
Treble +/- 10 dB @ 10 kHz
INPUTS:
Aux Input: Dual RCA phono jacks, summed
Mic/Page Input: Screw terminal input switchable between
mic/page
INPUT SENSITIVITY:
Aux Input: 100mV @ 10K ohms
Mic Input: 1mV @ 1K ohms
Page Input: 120mV @ 5K ohms
OUTPUTS:
4 ohms, 8 ohms, 25 V, 70 V
OUTPUT REGULATION:
Less than 0.5 dB, no load to full load
CONTROLS:
1 Aux input gain control, 1 mic/page gain control, 1 bass control,
1 treble control, 1 mic/page select switch
INDICATORS:
Power LED
PROTECTION:
Built-in, with AC line fuse
POWER CONSUMPTION:
120 volts AC, 60 Hz, 100 watts
DIMENSIONS:
4.25" H x 8.25" W x 13.625" D
WEIGHT:
11.5 pounds
COLOR:
Gray
OTHER FEATURES:
Mic/page input has precedence over the Aux input (defeatable)
UA 35T Specifications