Pioneer XV-CX303 - Manual (Page 8)

Before you start 01
8
En
Attaching the brackets
CX500 model only
Attach the brackets as described below. Before
attaching, make sure to check which Home
theater sound setup you want to use.
1
• Stack the speakers and fix with the
brackets.
Each speaker is provided with a color-coded
indicator on the model label on the rear side to
assist identification. Refer to the color
indicators and install the speakers correctly.
Standard surround/Front surround setup (Front
surround mode):
Front surround setup (Extra Power mode):
As shown in the illustration, stack the
speakers. Align the bracket with the respective
upper screw hole on the back of the front
speaker and fasten the screws securely.
Standard surround/Front surround setup (Front
surround mode):
Front surround setup (Extra Power mode):
Caution
• Do not attempt to carry the speakers when
they are connected with the bracket. Doing
so may cause damage to the bracket or
worsen damage to the bracket and
speakers in the event they are dropped.
Note
1 • Refer to Home theater sound setup on page 24 for details on how to place your speakers.
• Standard surround/Front surround setup (Front surround mode) only - Attaching brackets is necessary only when mounting
center speakers to right and left.
Front speaker
Center speaker
Left
Green
White
Green
Red
Right
Color indicator
Model label
Front speaker Color indicator
Model label
Center speaker
Surround speaker
Left
Blue
White
Green
Gray
Red
Green
Right
Bracket
Screw
Center speaker
Front speaker
Surround speaker
Bracket
Screw
Center speaker
Front speaker
CX303_505_500.book Page 8 Wednesday, June 27, 2007 2:39 PM