Netlink desktop chargers – Polycom SpectraLink NetLink DCX100 User Manual

Page 29

Advertising
background image

SpectraLink Corporation

NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide

Part Number: 72-1004-01-J.doc

Page 29

NetLink Desktop Chargers

NetLink e340 Wireless Telephone

NetLink i640 Wireless Telephone

In DCE100 Desktop Charger

in DCX100 Desktop Charger

Overview The NetLink Desktop Charger is a one-slot charger available in two

models. Model DCE100 is designed to charge the NetLink e340
Wireless Telephone with the BPE100 Battery Pack or the NetLink
h340 Wireless Telephone with the BPN100 Battery Pack. Model
DCX100 is designed to charge the NetLink i640 Wireless
Telephone with the BPX100 Battery Pack. The models are not
interchangeable.
Full charging is accomplished in approximately one and a half
hours.

Set up the Desktop Charger by first obtaining the appropriate
SpectraLink power supply for the country or region. Place the
Desktop Charger on a flat, horizontal surface. Plug the power
supply into the Desktop Charger and into an appropriate wall
outlet.

The user must end any call in progress by pressing the

End Call

button on the handset before placing the handset into the Desktop
Charger. The handset may be off or in standby mode during
charging.

Indicator light Place the NetLink Wireless Telephone into the Desktop Charger

slot facing forward. If the handset is placed correctly, the red
indicator light will come on. The indicator light will not come on
when the slot is empty, when the NetLink Wireless Telephone is
improperly seated, or when the Desktop Charger has no power
applied.

Charging indicator While the handset is charging in standby mode, it will display its

extension number and Charging…. The battery icon will show
charging progress. The handset is fully operational and will ring if
called. When the handset is charging while turned off, only
Charging… will display and no calls will be received. The dots will
be racing during the charging cycle. It is normal for the Battery Pack
to become warm when charging.

Charge Complete When the handset is fully charged,

Charge Complete

will display.

The indicator light will remain on until the handset is removed.

Advertising