Panasonic AJ-HPX2700 - Manual (Page 14)

13
1080/24PsF Line Output and Other System Interfaces
to Meet High-end Production Needs
Three HD SDI Outputs
Two HD SDI output terminals (A/B) that also comply with
1080/24PsF standards and include embedded audio are standard
equipment. This lets you make backup recordings on an
AJ-HPM110 P2 Mobile or digital VTR, with rec start/stop linking.
An HD SDI video signal can also be output from the MON OUT
terminal. Character and marker displays can be set separately for
HD SDI OUT and MON OUT.
Down-Converted SD Video Output
The output signal from the MON OUT terminal can be switched to
HD SDI or VBS. When VBS is selected, a down-converted SD video
signal (analog composite) is output.
IEEE 1394 DVCPRO Output (AJ-HPX2700 only)
The AJ-HPX2700 comes equipped with an IEEE 1394-compliant
DVCPRO output (6 pin) terminal. Use the AJ-HPX2700 in tandem
with a compatible recorder such as the AG-HPG10G P2 Gear,
AJ-HPM100 P2 Mobile or Focus Enhancements FS-100 FireStore,
and the AJ-HPX2700 can make degradation-free backup recordings
with DVCPRO HD stream output.*
*IEEE 1394 backup recording is possible only with the DVCPRO HD codec.
USB 2.0 Interface Compatible with Host and Device Mode
In device mode, the P2 HD cam's card slot can be used to connect
a PC as an external device for nonlinear editing and transmission
over networks. In host mode, P2 files can be copied onto a hard
disk without using a PC.
Multi-Function RCU System (Option)
The P2 HD VariCam comes equipped with an RCU terminal for
connecting the optional AJ-RC10G Remote Control Unit. This lets
you adjust the image and control the recording operation while
monitoring the camera image.
Multipurpose DC OUT Terminal (4 pin)
In addition to supplying power to an LCD monitor, this terminal can
be used for remote rec start/stop control by connecting it to an
external switch, or as a tally lamp by connecting it to an LED lamp.
This kind of multipurpose switch is handy for mounting the P2 HD
VariCam to a crane or other location.
Additional Features
• By mounting the optional AJ-GPS910G GPS unit, the P2 HD
VariCam can record real-time position data (latitude, longitude, and
altitude), conforming to UMID standards.
* The GPS unit is not available in some areas.
• Built-in SMPTE time code generator/reader, with TC in/out terminal.
• Genlock input terminal can also be used as return video (HD-Y/
VBS)
*It can not verify 23.98PsF and the 24PsF signal.
• UniSlot® wireless receiver compatible (dual channel)
* UniSlot® is a trademark of Ikegami Tsusinki Co., Ltd.
Side terminal (both models)
Rear terminal (AJ-HPX3700) Rear terminal (AJ-HPX2700)
HD view finder (optional AJ-HVF21G— both models)