Perle Systems 5500305-20 - Manual (Page 13)

Gigabit Media Converter Module – Installation Guide
13
Operation
Status LED
The Perle Gigabit Media Converter Modules have three single
color status LEDs located on the face plate of the module.
PWR - Power/Test
•
On: Power is on, module is operating normally
•
Blinking slowly: the module is in loopback mode.
•
Blinking quickly: the module has a hardware error.
LKF - Fiber Link/Activity
•
On: Fiber link present.
•
Blinking quickly: Fiber link present and receiving data.
•
Blinking slowly: Fiber link disabled due to loss of copper link.
•
Off: No fiber link
LKC - Copper Link/Activity
•
On: Copper link present.
•
Blinking quickly: Copper link present and receiving data.
•
Blinking slowly: Copper link disabled due to loss of fiber link.
•
Off: No copper link .