Panasonic VDR-D160GN - Manual (Page 79)

Editi
n
g
Editing still pictures
79
LSQT1184
(SD)
You can write the data of still pictures to be printed and number of copies (DPOF data) onto the SD
card.
¬Rotate the mode dial to select .
1 Press the MENU button, then select
[ PLAY SETUP] # [ DPOF SET] # [SET] and
press the joystick.
2 Select the file to be set, then press the joystick.
The number of prints set to be in DPOF is displayed.
3 Move the joystick up or down to select the number of prints, then
press the joystick.
≥ You can select from 0 to 999. (The selected number of pictures can be printed with the printer
supporting DPOF.)
≥ To cancel the setting, set the number of prints to [0].
≥ To set other files, repeat steps 2–3.
To complete the settings
Press the MENU button.
To cancel all DPOF settings
Press the MENU button, then select [ PLAY SETUP] # [ DPOF SET] # [CANCEL ALL] and
press the joystick.
≥ When the confirmation message appears, select [YES], then press the joystick.
∫ What is DPOF?
DPOF stands for Digital Print Order Format. This enables picture printing information to be written
onto an SD card so that it can be used on a system supporting DPOF.
≥ The DPOF setting can be established for up to 999
files.
≥ DPOF setting made on other devices may not be
recognized by this unit. Please perform the DPOF
settings on this unit.
≥ You cannot add the recording date to pictures to be
printed with the DPOF settings.
DPOF setting
This is for writing the printing data on an SD card.
LSQT1184(ENG).book 79 ページ ２００７年２月５日 月曜日 午後１時２９分