Assign policies to the role – Polycom A800 User Manual
Page 23
Advertising
Aruba Mobility Controllers: A200, A800, A2400, A6000
PN: 1725-36080-001_J.doc
23
Assign policies to the role
Create a role, for example
phones
, and assign the policies to this role.
This is the role that would be assigned to the handsets when they are
authenticated successfully.
The Security Policies and QoS can also be configured through the
command line interface (CLI). The CLI commands corresponding to
this section are as follows:
configure terminal
netdestination tftp-server
host 10.168.0.20
!
netdestination svp_server
host 10.168.0.11
host 10.168.0.12
!
netdestination dhcp-server
host 10.168.0.21
!
ip access-list session phone_acl
user user any deny
user alias svp_server svc-svp permit queue high
Advertising