Attaching to a wall, Fitting speaker stands, Si mp le s etu p – Panasonic SC-PT754 User Manual

Page 6: Speaker installation options

Advertising
background image

6

Si

mp

le

S

etu

p

Po

s

it

io

n

in

g

RQ

TX00

94

Notes on speaker use
Use only supplied speakers

Using other speakers can damage the unit, and sound quality will be
negatively affected.

≥ You can damage your speakers and shorten their useful life if you play

sound at high levels over extended periods.

≥ Reduce the volume in the following cases to avoid damage:

– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise

from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.

– When adjusting the sound quality.
– When turning the unit on or off.

If irregular coloring occurs on your TV

The center speaker is designed to be used close to a TV, but the picture
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetizing function of the TV should correct the problem. If it
persists, move the speakers further away from the TV.

Caution

≥ Do not touch the front netted area of the speakers. Hold by the sides.

e.g. Center speaker

≥ Do not stand on the base. Be cautious when children are near.

e.g.

[PT754] Front speaker

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥ The wall or pillar on which the speakers are to be attached

should be capable of supporting 10 kg (22 Ibs) per screw.
Consult a qualified building contractor when attaching the
speakers to a wall. Improper attachment may result in damage to
the wall and speakers.

1 Drive a screw (not included) into the wall.

2 Fit the speaker securely onto the screw(s) with the hole(s).

Fitting speaker stands

(not included)

(Except subwoofer)

Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.

≥ The stands must be able to support over 10 kg (22 Ibs).
≥ The stands must be stable even if the speakers are in a high

position.

e.g. Center speaker

Caution

The main unit and supplied speakers are to be

used only as indicated in this setup. Failure to
do so may lead to damage to the amplifier and/
or the speakers, and may result in the risk of
fire. Consult a qualified service person if
damage has occurred or if you experience a
sudden change in performance.

Do not attempt to attach these speakers to

walls using methods other than those
described in this manual.

Speaker installation options

DO

DO
NOT

DO
NOT

‰7.0 mm to 9.4 mm
(

9

/

32

q to

11

/

32

q)

4.0 mm to 6.0 mm (

5

/

32

q to

1

/

4

q)

Wall or pillar

‰4.0 mm (

5

/

32

q)

At least 30 mm (1

3

/

16

q)

e.g.

[PT660]

Surround speaker

e.g.

[PT660]

Front speaker

e.g.

[PT660]

Center speaker

190 mm
(7

15

/

32

q)

e.g.

[PT754]

Front speaker
Attach to a wall without the
base and the stand

e.g.

In this
position, the
speaker will
likely fall if
moved to the
left or right.

Move the
speaker so
that the
screw is in
this position.

DO

DO
NOT

Speaker stand
(not included)

Plate thickness plus
7.0 mm to 10 mm
(plus

9

/

32

q to

13

/

32

q)

5.0 mm (

3

/

16

q), pitch 0.8 mm (

1

/

32

q)

Metal screw holes
For attaching to
speaker stands

60 mm (2

3

/

8

q)

SC-PT660-663P-PC_eng.book 6 ページ 2007年12月11日 火曜日 午後6時27分

Advertising