PYLE Audio Mobile Audio System PLDTF5M - Manual (Page 5)

User Guide
-3- -26-
1. Before operating this product, please
read this instruction manual and the
attached information carefully.
2. This product is used at the 12 -
13.8 V D.C. Ground. In the condition
of the negative ground connect with
the metal body of car, it is safe to
operate.
4. Do not use the loudspeaker whose
resistance is lower than 4
in order
not to damage the unit.
5. To ensure the product is in normal
operation, it must be far away from
water, dust and magnetic reflection
region.
6. When playing discs, be sure the
symbol side must be upward,
otherwise it cannot play properly.
3. Do not use the fuse whose rating
amperage is over that of the
appendix s.
'
7. During high speed operation, if the
disc has serious scratches and
breaks or rough surface, the life of
the optical laser head may be
shorten. Please pay attention to the
following points:
1) Do not use discs with poor quality;
2) Store and use the DVD discs
carefully;
3) Do not write on the discs with an
ink-pen or other writing materials,
nor Mark on them;
4) When playing DVD disc, do not
take it out randomly;
5) When a disc is inserted into this
products, do not try to insert
another Disc into this product;
6) When taking out the playing disc,
do not touch the recording surface
of the disc;
7) Do not expose the disc under
direct sunlight or high
temperature.
8. When wiping discs, please move
the cloth from the center hole
towards the outer edge. Attention:
do not use chemical solution or
common cleanser.
9. Fix the unit in the steady parts. If
you have parked your car in hot or
cold situations, wait until the
temperature in the car becomes
normal before operating the unit.
10.The electronic antenna of your car
fixed will rise automatically when
you operate it, if it has.
11.In rainy day or wet area, dew may be
coated on the laser lens of this
product, which cannot work properly,
if this happens. In this case, please
take out the disc and keep this
product stop working for one hour
until the steam vapored, then this
unit can resume to normal operation.
12.If this product is out of order, please
shut off the power sources
immediately and contact with
authorized repairman in time. Do not
disassemble it by yourself.
Installation
CAUTION:
2. The location of the player must not obstruct the driver .
4. Follow the player connecting diagram, using the appendixes provided with
the unit.
1. Always use an experienced installation technician.
3. Do not install the player in excessive dusty, shakable, high-temperature
or humid condition.
Note : these conditions will adversely affect the player s operation.
,
Hex. bolt
Body
Flexible washer
Car panel
Mounting collar
Screw
Flat washer
Mounting metal bar
Hex. nut
Unit
T-key
Follow the arrowhead direction to take out the unit with T-key.