Panasonic PT-AE3000E - Manual (Page 20)

B
asi
c Op
eration
Switching the projector on/off
20 -
E
NGLISH
Power indicator informs you the status of the power.
When the TEMP indicator is flashing, the power
indicator will not light.
Power indicator
Power indicator
Indicator status Status
No illumination or flashing The MAIN POWER button is switched off.
Red Lit The MAIN POWER button is switched on and the projector is in standby mode.
Green
Flashing The power button is switched on and the projector is getting ready to project.
Lit Projecting.
Orange
Lit The power button is switched off and the projector is cooling the lamp.
Flashing
The power button is switched on again when cooling the lamp and recovering to
projection mode. Recovery may take a while.
NOTE:
• See “TEMP indicator” on page 45.
• While the projector is cooling the lamp, do not switch the MAIN POWER button off or unplug the mains lead.
• The electric consumption in standby mode is 0.08 W.