Paradyne Micro Interface Module MIM-2000F - Manual (Page 5)

MIM2-A2-GZ42-00 June 2005 5
LED Indicators
Each port is associated with two LEDs: Lnk (Link) and Act (Active):
Regulatory Notices
UNITED STATES – EMI NOTICE: !
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The authority to operate this equipment is conditioned by the
requirements that no modifications will be made to the equipment
unless the changes or modifications are expressly approved by
Paradyne Corporation.
CANADA – EMI NOTICE: !
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003
du Canada.
Table 1. Front Panel LEDs
LED State Indication
Lnk (Link) Solid green Connection is established
No illumination Connection is not established
Act (Active) No illumination No data activity on the circuit
Flashing amber Data is flowing through the circuit
!