Paradyne Hotwire ATM Line Cards 8385 - Manual (Page 97)

5. Diagnostics
8335-A2-GB20-70 February 2003 5-11
ATM Ping
Use the ATM Ping screens to verify that the virtual circuit is connected. To access
the ATM Ping menu, follow this menu selection sequence:
Diagnostics
→ATM Ping→ATM Ping Config (D-C-A)
The ATM Ping screen appears.
Use the ATM Ping screen to initiate a test to verify that the virtual circuit is
connected. The card sends cells to the remote end of the virtual channel
connection (the endpoint or ATM network), which returns them. The estimated
round trip time is then displayed. The screen is refreshed every 15 seconds.