Paradyne 3161 User Manual
Acculink, Dsu/csu
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- About This Guide
- Introduction
- Installation
- Using the Front Panel
- Configuration
- Overview
- Setting Customer Identification
- Changing Configuration Options
- Configuring the 10BaseT Port (Models 3160 and 3165)
- Configuring the COM Port or Modem Port for SNMP or Telnet Access
- Configuring SNMP Traps
- Configuring DS0 Channels
- Providing Backup Capability
- Selecting the Timing Source
- Enabling the COM Port for Carrier-Mounted DSU/CSUs
- Deactivating the Alarm Relay for Carrier-Mounted DSU/CSUs
- Security
- Using the Integral Modem
- Monitoring and Troubleshooting
- Testing
- Front Panel Menu
- Technical Specifications
- Configuration Options
- Configuration Worksheets
- Pin Assignments
- Overview
- T1 Network Interface
- DTE Drop/Insert Interface
- 10BaseT Connector
- MODEM Port Interface
- AUX Port Interface (Model 3164 Only)
- COM Port Interface
- EIA-530-A Port Interface Connector
- EIA-530-A-to-RS-449 Cable Interface
- EIA-530-A-to-V.35 Cable Interface
- EIA-530-A-to-X.21 Cable Interface
- Serial Crossover Cable
- Power Input Connector
- Optional DC Power Cable (Model 3164 Only)
- External Clock Interface
- SNMP MIB Objects
- IP Network Addressing Scenarios
- Front Panel Emulation
- Asynchronous Terminal Interface Operation
- Equipment List
- Glossary
- Index