Paradyne 3161 - Manual (Page 114)

6. Using the Integral Modem
6-2 March 2001 3160-A2-GB24-10
Entering Numbers in the Phone Directories
The DSU/CSU has five general directories (1 through 5) and one alarm directory
(A). Use the general directories to store phone numbers for remote devices such
as standalone DSU/CSUs and ASCII printers. Use the alarm directory to store the
phone number of the primary ASCII terminal or printer you use to display or print
alarms. This function is not available for carrier-mounted DSU/CSUs because the
integral modem is not available for carrier-mounted DSU/CSUs.
Procedure
To enter or change numbers in the phone directories:
1. From the top-level menu screen, press the key until the Ctrl selection
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Call.
4. From the Call Setup screen, select ChDir.
The Directory 1 displays first, along with its phone number if one has been
entered.
5. Press F1 (Next) to display the next directory (2, in this case). Press F2
(Previous) to display the previous directory (A, in this case). Directories
appear in order, 1 through 5 and then A.
F1 F2 F3
Control:
Call Rel LED
F1 F2 F3
Call Setup:
Pass Dial ChDir
F1 F2 F3
1: xxxxxxxxxxxxxxxxx
Next Prev Edit