Panasonic GP-US932CUS - Manual (Page 27)

• Try to change the setting of "DTL MODE".
27
20
• Is the lens aperture appropriately adjusted?
Check whether the aperture is appropriately adjusted.
Use lenses with recommended F number or higher and
3CCD-specific lenses.
Symptom
Blurred screen
Plural edges visible
"AWC OK" not displayed
Black bars at right and left of
image
Vertically longer image
No sound from monitor
• When the screen is too bright, narrow the lens aperture or
set "ELC" to "ON".
• This phenomenon depends on the specifications of the
monitor.
Select the wide and full screen display at the monitor side.
• This unit provides outputs on the assumption that the screen
is 16:9.
Select the wide screen display at the monitor side.
• The monitor is not applicable to sound output.
—
Cause/solution
Reference
pages
14
• Try to change the monitor cable.
—
14, 18
—
—