Porter-Cable PTS9 - Manual (Page 7)

7- ENG D29847
MAINTENANCE
To Install Abrasive Disc
● Disconnect the tool from the air supply holding it so sander pad faces up.
● Clean dust from sander pad.
● Position abrasive disc onto sander pad.
● Press abrasive disc firmly onto sander pad. Align the dust extraction holes (if equipped) in
the abrasive disc with the holes in the sander pad.
IMPORTANT: Do not use PSA (pressure sensitive adhesive) disc with Hook & Loop pad as the disc
may be thrown from the pad causing personal injury.
●