Panasonic AK-HC931BP - Manual (Page 19)

19
 Before proceeding with the connections, set the CCU power switch to the OFF position.
 Connect the multi-format camera to the CCU.
 Connect the ROP cable to the CCU and ROP.
 When the camera power switch is set to ON after the CCU main power switch has been set to ON, the camera can be
controlled using the ROP.
 Upon completion of shooting, set the CCU camera power switch and main power switch to OFF.
2 viewfinder
AJ-HVF20P
Lens
Multi-format camera
AK-HC931BP
ROP cable
Remote operation panel
AK-HRP931P
Camera control unit
AK-HCU931P
System connections 1 (with multi-format camera)