Pioneer AVIC-D2 - Manual (Page 10)

8
About the XM NAVTRAFFIC
Logo
Required $12.95 basic monthly XM radio sub-
scription and XM NavTraffic service subscriptions
sold separately. XM NavTraffic only available in
select markets. Other fees and taxes, including a
one-time activation fee, may apply. Subscription
fee is consumer only. All fees and programming
subject to change. Subscriptions subject to Cus-
tomer Agreement available at xmradio.com. XM
radio service only available in the 48 contiguous
United States.
© 2005 XM Satellite Radio Inc. All rights reserved.
NAVTEQ Traffic- is a trademark of NAVTEQ North
America, LLC.-2005. NAVTEQ North America,
LLC.
To Protect the LCD Screen
❒ Do not allow direct sunlight to fall on the dis-
play when this product is not being used.
Extended exposure to direct sunlight can
result in LCD screen malfunction due to the
resulting high temperatures.
❒ When using a portable phone, keep the
antenna of the portable phone away from the
display to prevent disruption of the video by
the appearance of spots, colored stripes, etc.
❒ Never touch the screen with anything besides
your finger when operating the Touch Panel
functions. The screen can scratch easily.
For Viewing LCD Comfortably
Due to its construction, the view angle of the LCD
screen is limited. The viewing angle can be
increased, however, by using BRIGHTNESS to
adjust the black density of the video. When using
for the first time, adjust the black density in
accordance with the viewing angle to adjust for
clear viewing. DIMMER can also be used to
adjust the brightness of the LCD screen itself to
suit your personal preference.
Resetting the Microprocessor
• Pressing the RESET button deletes the
contents of the navigation system’s mem-
ory. For details, see section “About the
Data being Deleted” of the Operation Man-
ual.
Pressing the RESET button lets you reset the
microprocessor to its initial settings without
changing the condition memory.
The microprocessor must be reset under the fol-
lowing conditions:
• Prior to using this product for the first time
after installation.
• If the product fails to operate properly.
• If there appear to be problems with the opera-
tion of the system.
• When changing the combination of the equip-
ment.
• When adding/removing additional products
that connect to the product.
1
Turn the ignition switch OFF.
2
Press the RESET button with a pen tip or
other pointed instrument.
RESET button