Panasonic SC-DP1 - Manual (Page 31)

31
RQT6817
Othe
r fu
nc
ti
o
n
s
See page 30 for menu and option details.
Preparation
Press [
1 DVD/CD].
(When a disc is in the tray, press [ 1 DVD/CD] and press [∫].)
1
Press [SETUP] to show the menus.
2
Press [ 2, 1] to select the menu’s tab.
The screen changes to display the menu.
3
Press [ 3, 4] to select the item you
want to change and press [ENTER].
4
Press [ 3, 4, 2, 1] to select the
option and press [ENTER].
The screen now shows the menu again.
To return to the previous screen
Press [RETURN].
When you are finished
Press [SETUP].
[DVD-V]
The password screen is shown when you select levels 0 to 7.
1 Input a 4-digit password with the numbered buttons and press
[ENTER].
≥If you enter a wrong number, press [SHIFT]i[CANCEL] to
erase it before you press [ENTER].
≥The lock symbol appears closed to show the rating is locked.
≥Do not forget your password.
2 Press [ENTER] to confirm the 4 digits.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Change the settings when you have connected equipment through
this unit’s OPTICAL OUT terminal.
Select the maximum sampling frequency of PCM digital output.
Check the digital input limitations of the equipment you connect.
Off: When not connected digitally
Up to 48 kHz (factory preset):
Signals over 48 kHz converted to 48 or 44.1 kHz
Up to 96 kHz: Signals over 96 kHz converted to 48 or 44.1 kHz
Up to 192 kHz: Signals up to 192 kHz are output
[Note]
≥Signals from copy-protected discs are converted to 48 or 44.1 kHz
irrespective of the setting.
≥Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment’s operating
instructions for details.
Bitstream (Factory preset for Dolby Digital):
Select if the equipment you connected can decode the signal.
PCM (Factory preset for DTS Digital Surround and MPEG § ):
Select if the equipment you connected cannot decode the signal.
§ MPEG: Only for the United Kingdom, Continental Europe, Russia,
Australia and N.Z.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to PCM. If not, signals the equipment
cannot process will be output by this unit, causing high levels
of noise which can damage your hearing and the speakers.
Common procedures
Disc Video Audio Display Others
() () () ()
^------------------------------------------------------------------------------------------J
TV Í
TV/AV
SETUP
PROGRAM
1 3 2
4 6 5
7 9 8
0 S10
REPEAT
AUDIO
TUNER/A UX
DIREC T NAVIGA
TOR
TOP MENU
PLAY LIST
MENU
CANCEL
MUTING VOLUME
SUBTITLE
PLAY MODE
CLOCK/
TIMER
SLEEP
FPLAY
Í
P.MEMORY
TV VOL r
TV VOL s
PAGE
ENTER
GUI DISP
DISPLAY
QUICK REPLAY ZOOM
SHIFT SURROUND
CINEMA D.ENH SUBWOOFER
SOUND
SLOW/SEARCH
ANGLE
RETURN
TV
CH
X TV
CH
W
X
SKIP
W
GROUP
DVD/CD
1 3 2
4 6 5
7 9 8
0 S10
ENTER
ENTER
CANCEL
SHIFT
DVD/CD
RETURN
SETUP
DOUBLE
RE-MASTER
Numbered
buttons
Disc
Audio
Subtitle
Menus
Ratings
English
English
Automatic
Level 8
SETUP
SELECT
ENTER RETURN
TAB
Entering a password (Ratings)
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
Digital output
PCM Digital Output
Dolby Digital, DTS Digital Surround and MPEG §
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater Systems, Inc.
US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and
other world-wide patents issued and pending. “DTS” and “DTS
Digital Surround” are registered trademarks of Digital Theater
Systems, Inc. Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
6817b-p26-36.fm 31 ページ ２００３年７月４日 金曜日 午後６時１８分