Power Acoustik PADVD-220 - Manual (Page 16)

Page- 15
PBC (Playback Control) function (for VCD only)
If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.
1. Long press PBC/STOP button to activate interactive menu on screen during playback.
2. If the menu consists of titles, you can select a desired one using the
digit 0-9 buttons.
3. The VCD starts playing the selected title automatically or press ENTER button to confirm the
selected track for playback.
MENU function (for DVD only)
1. Press MENU button on the RC or on the panel to s activate interactive DVD menu on screen
during playback
2. Long press MENU button on the RC to s activate interactive DVD title menu on screen during
playback
3. If the menu consists of titles, you can select a desired one cursor the / or / buttons.
4. press ENTER button to confirm the selected track for playback.
Programming the playback
1. Press PROG button on the RC to enter program list.
2. Use
, , , buttons and digit buttons to enter the number of the desired track to be on
selected position.
For DVD and File disc, select title and chapter number.
For VCD and CD, select track number.
3. Move the cursor to select START and press ENTER to play.
4. If you want to change page, move the cursor to NEXT
or prev to change next or
previous page
5. Press PROG again or move the cursor to select EXIT to cancel program play.
Selecting different audio modes
z For DVD disc: press AUDIO on the RC repeatedly to select the audio language to listen (if the
disc supports multi-language mode).
z For VCD disc: press AUDIO on the RC repeatedly to select the following modes:
MONO LEFT →MONO RIGHT→MIX MONO→STEREO→EXIT
Changing the subtitle language (for DVD only)
Press SUBTITLE button on the RC to select the preferred language for the disc menu. When the
selected language is recorded on the disc then this language will automatically be selected. If not,
the first language recorded on the disc is displayed.
Changing size
Press and hold for 2 seconds the A-B/ZOOM on the RC. The picture will be enlarged accordingly:
X2 => X3 =>X4 => X1/2=>X1/3=>X1/4X=>Normal.
Changing angle (for DVD only)
If DVD discs support multi-angle playback, press ANGLE on the RC button to playback images in
different camera angles. If discs doesn't support multi-angle playback, this function will not work. If
no operation within 1 second, angle description will disappear.