Pyramid Car Audio CDR40DX - Manual (Page 8)

8
RESET BUTTON
RESET button (17) is placed on the housing and must be activated with either a
ballpoint pen or thin metal object. The RESET button (17) is to be activated for the
following reasons:
• Initial installation of the unit when all wiring is completed.
• All the function buttons do not operate.
• Error symbol on the display.
FACEPLATE RELEASE
Press REL button (18) to detach the removable faceplate.
FLASHING LED
If the front panel does not install in the main unit, the LED indicator (20) will be
flashing.
RADIO OPERATION
BAND SELECTOR
Press BND button (7) to change bands as below:
SELECT STATION
Rotate the TUNE knob (8) clockwise or anti-clockwise to adjust the frequency
upward or downward.
LOCAL/DISTANT
Press the REP/LOC button (9) to select between local setting for reception of
strong station and distant setting for reception of weak stations when tuning.
FREQUENCY DISPLAY
The frequency of current reception is indicated by the dial pointer (19).
OPERATION
FM AM