Panasonic VE-GP10 - Manual (Page 2)

To receive a call
When the phone rings... Lift the personal
phone from the charger or press .
Talk......To end the call, place the personal
phone on the charger or press .
To make a call using the speakerphone
(Hands-free talk)
Press
( ). Dial. Talk to the
microphone......To end the call, place the
personal phone on the charger or press
.
To receive a call with the speakerphone
(Hands-free talk)
When the phone rings...
Press .
Talk to the microphone.....To end the call,
press .
To place the current call on hold
Press ( ) during a call.
To retrieve the held call
Press or .
To transfer the held call to the base unit
Press ( ) during a call. ( When you
use multiple personal phones, press .)
Place the personal phone on the charger,
or press when the other party answers.
To transfer the held call to another
personal phone
Press
during a call. Press
(Intercom No.). Place the personal phone on
the charger, or press when the other party
answers.
To hear recorded messages while away
from home (Remote control)
Preparation before you leave home
Store a remote control number.
Press
. Enter the desired 4-digit
number. Press , then press . When you
leave home, press to turn on the indicator.
To hear messages
Dial your home phone number. While the
outgoing message is played back...
Enter your remote control number.
Announcement Press . You will
hear recorded messages if any.
NOTE
This operation can be made only from
telephones which can send DTMF signals.
Base unit (VE-GP10)
To make a call
Lift the handset. Dial.
To receive a call
When the phone rings... Lift the handset.
To place the current call on hold
Press ( ) during a call.
(You can place the handset on the base unit.)
To retrieve the held call
If you have returned the handset on the
base unit, lift the handset.
If you have not returned the handset on
the base unit, press again.
To transfer the held call to the personal phone
Press ( ) during a call. ( When you
use multiple personal phones, press
(Intercom No.).) Place the handset on
the base unit when the other party answers.
To use TAM (Telephone Answering Machine)
When you leave home, press ( ) to turn
on the indicator.
( To deactivate, press
again to turn off the
indicator.)
When receiving a call while TAM is
activated, it answers the call automatically
in Japanese, and records the incoming
messages.
Then, the
indicator starts flashing.
When you return home, press to play
back the messages.
The
indicator turns off and the answering
mode is deactivated.
To erase the message, press
( ) while
listening to the message you want to erase.
To play back the message while TAM is
deactivated, press
( ).
* Up to 50 messages can be recorded for
approx. 12 minutes in total.
Personal phone (KX-FKN523)
To make a call
Lift the personal phone from the charger and
press
( ). Dial.......To end the call,
place the personal phone on the charger or
press
( ).
● The number after the button shows the location
of the button described in the previous page.