Polaris 700 - Manual (Page 38)

36
CONTROLS
Engine Electrical Switches
Override Switch (1) (Reverse Speed Limiter) - This vehicle is
equipped with a reverse speed limiter system. To gain additional power
while backing, depress the override switch. NOTE: The override
switch also allows activation of Demand 4 Drive (All Wheel Drive) in
reverse, if the AWD switch is on.
Engine Stop Switch (2) - The engine will
not start or run when the switch is in the off
position. Its purpose is to provide the
operator with a quick means of engine
shutdown in case of an emergency.
Main Switch (3) - To start the engine, slide
the stop switch to the center run position and turn the main key switch
clockwise past the on position. Release the key when the engine starts.
NOTE: Both the main switch and the
emergency engine stop switch will shut off all electrical power to the
vehicle, including lights. To stop the engine, slide the stop switch
either right or left to the off position.
Activating the override switch while the throttle is open can cause
loss of control, resulting in severe injury or death. Do not activate
the override switch while the throttle is open.
WARNING
1
3
2
RUN OFF OFF
2