Panasonic CQ-VX100W - Manual (Page 26)

TILT
CQ-VD5005W
DIMMER DIM
TUNE/TRACK
MUTE MAP SOURCE
POWER VOL
PUSH SEL
AV1 IN
OPEN
CLOSE DIMMER
IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER
TILT
TEXT
CQ-VX100W
SOURCE
[SOURCE]
25
26 CQ-VX100W
English
AV1/AV2
Note:
¡You can set up the system so that the AV mode is not
selected (source skip). ( a page 31)
¡If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡Only the pin jack of the supplied Conversion Cable for
AV 1 IN or a pin jack that has the same electrode
arrangement can be connected to the AV 1 IN terminal.
(See Fig. 1.)
¡Use of the supplied Conversion Cable for AV 1 IN or an
audio pin jack that has the same electrode arrangement
also allows users to enjoy only music. In this case, the
screen background becomes black.
Input
Preparation:
¡Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
Source Button
To switch Operation Screen ON, touch the center of
touch panel.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
Source Selection
Press [SOURCE] to change to the
desired mode.
AV1 IN
Audio (L)
<Fig. 1>
Video
Ground
Audio (R)