Panasonic KX-PW30CL - Manual (Page 10)

Hand Scanner Functions
Printing all of the stored
documents 1 Printing the stored documents
individually 2
1. Connect the hand scanner to the base unit. 1. Connect the hand scanner to the base unit.
10
2. Turn the power (power switch) ON.
3. Set (operation) to the “ ” (output)
position.
3. Set (operation) to the “ ” (output)
position.
– The base unit display will show:
2. Turn the power (power switch) ON.
– The base unit display will show:
Display
4. Press (function) twice.
5. Press (item) twice.
6. Press (select) to
select “
”.
7. Press (record).
9. Press (record).
8. Enter the desired page
number (2 digits) using
the dial keypad on the base unit.
10. Press (stop).
Cable for the hand
scanner
Core
4. Press (start/stop).
10 pages are stored
in the hand scanner.
– The base unit prints out all of the stored
documents.
11. Press (start/stop).
– The base unit prints out the selected
document.