Panasonic DIGITAL IMAGING SYSTEM DP-1810F - Manual (Page 31)

Customizing Your Machine
31
Fax Parameter Table
P
rogra
mming
Y
o
u
r Ma
chine
NOTE 1. The standard settings are printed on the Fax Parameter List. To print out Fax Parameter List,
see page 133.
2. The contents of Fax Parameter may differ depending on the each country’s regulation or
specification.
048 TELEPHONE LINE 1 PSTN Selecting the type of line connected.
2 PBX
049 PSTN ACCESS CODE (----) Setting PSTN Access Code. (max. 4 digits)
052 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode. Please
ask your Panasonic Authorized Dealer for details.
053 SUB-ADDRESS
PASSWORD
(----) Setting a 20-digit password for secured sub-address
communication.
057 COUNTRY CODE Selecting the country code when installing your machine.
063 PC-FAX RCV MODE 1 Print Selecting how the machine will execute the received Fax
document(s).
Print
: Print the received document(s).
Upload & Print : Print the received document(s) and
upload it’s file.
Upload : Upload the received document file.
2 Upload &
Print
3 Upload
077 DEPARTMENT CODE 1 Invalid Selecting whether the machine performs the Department
Code operation. (See page 94)
2 Valid
078 ROTATION XMT 1 Invalid Selecting whether the machine performs rotation
transmission.
2 Valid
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 39 to 43)
Invalid :Stores all documents into memory first before
dialling the telephone number.
Valid :Starts dialling the telephone number immediately
after storing the first page.
2 Valid
097 SPECIAL TRAY
No.1 - 3
1 None Select up to 3 Special Trays that will not be used for
printing received faxes (4-Tray configuration). One Tray
must always be available for receiving Faxes.
(You can specify one Tray (1 ~ 4) for each selection No. 1,
No. 2 and/or No. 3)
2 Tray 1
3 Tray 2
4 Tray3
5 Tray 4
099 MEMORY SIZE
(Flash Memory) - - Displays the amount of base and optional memory
installed.
(Base Memory + Optional Memory)
No. Parameter
Setting
Number
Setting Comments