Panasonic VA-1232 - Manual (Page 2)

Thank you for purchasing the Panasonic Easa-Phone VA-309182411232, Key Telephone
System.
* This system is equipped with the Hearing Aid device installed within the handset
receiver.
* Each outside (CO/PBX) line can be individually programmed for either tone dialing or
rotary pulse dialing.
All the keys on this unit are the non-lock type.
Notification to your local telephone company
Before connecting or disconnecting telephone lines, call the telephone company and inform
them of the following:
1: 7:
2 : COL 8:
Telephone numbers COL 3 : 9:
4 : 0:
5 : 1:
COL 6 : 2:
Model number
FCC registration number for VA-309 KSU at factory
VA-309 KSU for modify
number for VA-824 KSU at factory
VA-824 KSU for modify
FCC registration number for VA-1232 KSU at factory
VA-1232 KSU for modify
Facility interface code
Service order code
Ringer equivalence
Required network interface jack USOC
The FCC registration number will be found on the key service unit.
This unit must not be connected to a coin operated line.
If you are on a party line, check with your local telephone company.
Notice
To assure the safe use of your telephone, please observe the following guide lines for
installation and use.
* This product is an electrical device and can be hazardous if immersed in water.
To avoid the risk of electrical shock, do not use this unit while in the bathtub, shower,
or when wet. If you accidentally drop the unit into water, unplug it first, then retrieve
it by pulling it by the cord.
Do not use the telephone near sources of electric “noise” such as fluorescent lamps,
conditioner, washing machine, TV sets or radios.
* The telephone should not be exposed to heat sources, direct sunlight, extreme
temperatures, moisture, strong vibrations, greasy of dusty environments.
Never attempt to insert wires, pins, of similar objects in the vents or openings of the
telephone.
Never clean the telephone with benzene, paint thinner or other solvent materials.
Wipe with a soft cloth to clean.
* Do not change the unit installation location without consulting the dealer/installer.
1