Panasonic DMR-E85H User Manual

Page 11

Advertising
background image

11

RQT7462

G

e

tt

in

g

st

ar

te

d

You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.

Point the remote control at the television

While pressing [

Í TV], enter the code

with the numbered buttons.

Manufacturer and Code No.

Test by turning on the television and changing channels. Repeat
the procedure until you find the code that allows correct operation.
≥If your television brand is not listed or if the code listed for your

television does not allow control of your television, this remote
control is not compatible with your television.

If other Panasonic products are placed close together, change the
remote control code on the main unit and the remote control (the
two must match).
Under normal circumstances use the factory set code “DVD 1”.

1

While stopped

Press [FUNCTIONS].

2

Press [

3, 4, 2, 1] to select

“SETUP” and press [ENTER].

3

Press [

3, 4] to select “Others” and

press [

1].

4

Press [

3, 4] to select “Remote

Control” and press [ENTER].

5

Press [

3, 4] to select the code

(“DVD 1”, “DVD 2” or “DVD 3”) and
press [ENTER].

6

To change the code on the remote control

While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.

7

Press [ENTER].

When the following indicator appears on the

unit’s display

The unit’s remote
control code

Change the code on the remote control to match the main unit’s
(

➡step 6).

[Note]

Executing “Shipping Condition” in the SETUP menu returns the
main unit code to “DVD 1”. Change the remote control code to 1
(

➡step 6).

Television operation

e.g.,

01:

[0]

➡ [1]

Brand

Code

Panasonic/National

01, 02, 03, 04

GOLDSTAR/LG

15, 16

HITACHI

08

JVC

07

MITSUBISHI

09, 10

NEC

13

PHILIPS

12

SAMSUNG

12, 17, 18

SANYO

14, 19

SHARP

11

SONY

05

TOSHIBA

06

When other Panasonic products
respond to this remote control

SETUP

Disc

Tuning

Remote Control

Others

Press “

±” and “ENTER” together

for more than 2 seconds on the remote
control.

7462L.book 11 ページ 2004年3月24日 水曜日 午前11時4分

Advertising