Connections – Panasonic AW-CB400L User Manual

Page 9

Advertising
background image

8 (E)

ENGLISH

Connections

$

When connecting a convertible camera directly

• First, turn off the power of all the equipment before proceeding with the connections.

• Use the AW-PS505 for the AC adaptor of the ROP.

Connect the DC 12V OUT socket on the AW-PS505 to the DC 12V IN socket on the ROP using the DC cable provided with
the AW-PS505.

• Use the AW-PS505 for the AC adaptor of the convertible camera.

Connect the DC 12V OUT socket on the AW-PS505 to the DC 12V IN socket on the convertible camera using AW-CA4T1.

• Connect the CONTROL OUT TO CAMERA connectors [1] to [5] on the ROP with the I/F REMOTE connectors on the

convertible cameras through the connecting cables (optional accessory) AW-CA50T8 or AW-CA50T9 + RS-422/RS-232C
converter.
The distance between the ROP and the AW-CA50T8 or AW-CA50T9 + RS-422/RS-232C converter can be extended up to
a maximum of about 1000 meters using a 10Base-T (equivalent to UTP category 5) straight cable.

$

When connecting the ROP in a system that includes pan/tilt heads, pan/tilt control
panel and cable compensation unit

• First, turn off the power of all the equipment before proceeding with the connections.

• Connect the CONTROL OUT TO CONTROL PANEL connector on the ROP with the CAMERA CONTROL IN FROM ROP

connector on the pan/tilt control panel using the pan/tilt control panel connecting cable provided with the ROP.

• Power will be supplied to the ROP from the pan/tilt control panel.

• For details on how to connect the pan/tilt heads, pan/tilt control panel and cable compensation unit, refer to the instruction

manual provided with these units.

Advertising