PEAK-System Technik PCAN-DONGLE IPEH-002019 - Manual (Page 23)

PCAN-Dongle (ISO) – User Manual
23
Appendix B
Quick Reference
Hardware Installation
Connect the PCAN-Dongle to the PC's parallel port, insert the T-
piece at the cable's end between the keyboard port at the PC and
the keyboard connector (for power supply). When the PC is turned
on, the red LED indicates an existing power supply.
Software installation and startup under Windows
Execute the driver installation program from the supplied CD-ROM.
Restart Windows after the installation procedure.
Run the CAN monitor PCAN-View for Windows from the Start menu
as a sample application for accessing the PCAN-Dongle. Get the
parameters of the parallel interface (I/O address, interrupt) needed
for initialization of the PCAN-Dongle from Windows' Device
Manager.
HS-CAN connector (Sub-D, 9 pins)