Peavey 31FX - Manual (Page 6)

Frequency Response:
+/- 1 dB 20 Hz to 20 kHz
Distortion:
.005% 20 Hz-20 kHz
Input Impedance:
Balanced 20 k Ohms (Equal impedance to
ground)
Output Impedance:
330 Ohms
Maximum Input Level:
+21 dBu (8.6 V RMS)
Maximum Output Level:
+27 dBu (17 V RMS)
Nominal Input Level:
0 dBV (1 V RMS)
Nominal Output Level:
0 dBV (1 V RMS)
Input Headroom:
Nominal 21 dBu
Output Headroom:
27 dBu
Output Noise:
EQ in bypass: -101 dBV
EQ in, all flat: -95 dBV
Filter Frequencies:
20, 25, 32, 40, 50, 63, 80, 100, 125, 160,
200, 250, 315, 400, 500, 630, 800, 1 k,
1.25 k, 1.6 k, 2 k, 2.5 k, 3.15 k, 4 k, 5 k,
6.3 k, 8 k, 10 k, 12.5 k, 16 k, and 20 kHz
Filter Q:
4.77
Maximum Boost and Cut Filter:
+/- 15 dB
Maximum Boost and Cut Gain (WideBand
Gain):
+/- 15 dB
Low Cut Filter:
12 dB Per Octave
Frequency:
Min: 5 Hz
Max: 200 Hz
High Cut Filter:
12 dB Per Octave
Frequency:
Min: 5 kHz
Max: 35 kHz
All specifications are typical unless otherwise
noted. 0 dBV=1 Volt. All specifications are
referenced to nominal output level (0 dBV)
unless otherwise stated. All measurements are
wideband 20 Hz to 20 kHz unless otherwise
stated.
NOTE: All specs measured at 1V RMS
input and unbalanced output. All sliders at
mid position, all switches out unless otherwise
noted. Due to our efforts for constant
improvement, features and specifications
listed herein are subject to change without
notice.
6
SPECIFICATIONS