Set up for input signals, Component / rgb in select, Yuv / rgb in select – Pelican TH-50VX100U User Manual
Page 39
39
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y, P
B
, P
R
signals “COMPONENT”
RGB signals “RGB”
Notes:
Selection may not be possible, depending on which optional board is installed.
Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).
•
•
YUV / RGB IN SELECT
Select to match the signals from the source connected to the DVI input terminals.
YUV signals “YUV”
RGB signals “RGB”
Notes:
Selection may not be possible, depending on which optional board is installed.
Make setting of the selected input terminal (SLOT1 or SLOT2).
•
•
1
Display the menu screen.
2
Select “SET UP”.
SET UP
POS. /SIZE
SOUND
PICTURE
2
OK
1
select
3
Select “COMPONENT / RGB-IN SELECT” and set.
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
OFF
OFF
RGB
SCREENSAVER
SIGNAL
2
change
1
select
COMPONENT
RGB
4
Exit the menu.
or
1
Display the menu screen.
2
Select “SET UP”.
SET UP
POS. /SIZE
SOUND
PICTURE
2
OK
1
select
3
Select “YUV / RGB-IN SELECT” and set.
YUV/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
OFF
OFF
RGB
SCREENSAVER
SIGNAL
2
change
1
select
YUV
RGB
4
Exit the menu.
or