PYLE Audio PLTV64R - Manual (Page 13)

13
OPERATION
In this case, you also need to
consider if the IR (10) is available.
- When the display turns downward to
a certain angle, it will draw in.
• SELECTING RECEIVING MODE
Press TV/AV button (22) to select
among AV1/AV2/TV.
• SELECTING CHANNEL
- Press CH + button (28) or CH –
button (29) to choose channel
upward or downward.
- The numeric buttons (0, 1 ~ 9) (23)
allow you to select the correspinding
channel directly.
- Press digital select button (-/--) (24)
cooperatively used with numeric
buttons to select channel desired.
Fig. 4
Fig. 5
• PICTURE ADJUSTMENT/PROGRAM
SETTING/SYSTEM CONTROL
In TV mode, press MENU button (36)
to enter the main menu. And the menu
includes three sub-menus:
PICTURE MENU, TUNER MENU and
SYSTEM MENU.
Press the button repeatedly or press
/ buttons (37) to select the desired
item then press / buttons (38) to
enter the corresponding sub-menu to
set.
- In PICTURE MENU, use / buttons
(37) to select picture mode upward
or downward as follows:
Then use / buttons (38) to adjust
the selected item.
Note: In PAL SYSTEM, there is no
“TINT” item.
- In TUNER MENU, use / buttons
(37) to select picture mode upward
or downward as follows:
Then use / buttons (38) to adjust
the selected item.
- In SYSTEM MENU, use / buttons
(38) to select picture mode upward
or downward as follows:
Then use / buttons (38) to adjust
the selected item.
In AV mode, press MENU button (36),
the screen will display PICTURE MENU
and SYSTEM MENU but not TUNER
MENU. And in SYSTEM MENU, there
is no “SOUND” item. The setting
method is the same with that in TV
mode.
Note: In the menus (except TUNER
MENU), if you don’t operate over 6
seconds, the screen display will
disappear.
BRIGHT CONTRAST COLOR SHARP TINT
POS SKIP BAND FINE AFT SEARCH ASM
COLOR SOUND LANG. B/B CORING HALFTONE