Panasonic NV-SJ260 - Manual (Page 36)

36
Adjusting the Playback
Picture
Under normal conditions, the VCR automatically
adjusts the playback picture for optimum quality.
However, in some cases it may be necessary to adjust
it manually.
If the Picture Contains Noise Bars and It Is Not
Clear to See (Tracking adjustment):
If noise bars appear during normal playback, slow
playback or still playback, follow the operations below.
During normal or slow playback,
press the Channel button N
I (j)
or J (i) until the bars noise
disappear.
≥
If the noise bars appear during still
playback, switch the VCR over to
the slow playback mode and then
adjust the tracking as explained
above.
To Return to Auto Tracking:
Press the Channel buttons N
I (j) and J (i)
simultaneously.
If the Still Picture Scrolls Up or Down
(V-Lock Adjustment):
If the still picture scrolls up or down, perform the
following operation.
During still playback, keep the Channel button N
I (j) or J (i) pressed until the picture stops
scrolling.
Precautions:
≥
With certain TV models and tapes, it may not be
possible to adjust the tracking.
≥ If you play back a cassette that was recorded on
another VCR, the picture quality may be inferior and it
may be necessary to adjust the tracking. Also, on
some TVs, the picture may scroll up and down in the
special playback functions.
However, these are not malfunctions.
TV screen
Playback picture
containing noise bars