Panasonic DMC-FX5PP - Manual (Page 103)

Playback (advanced)
103
Preparation
• Connect the camera to a printer. (P99)
• Set the DPOF print with this camera in advance. (P78)
• Set the paper size and print quality. (Read the printer operating instructions.)
ª DPOF picture
1 Select [DPOF PICTURE].
• Press the [MENU] button, and you
can change the DPOF print setting.
(P78)
• When printing under the new
settings, disconnect the USB
connection cable and connect it to
the printer again.
2 Select [YES] and print.
• Press the [DISPLAY] button to print
the date.
• Press the [MENU] button to cancel
printing.
¬Suggestions/Tips ¬
• When the total number of prints becomes 255 or more, the number of remaining
pictures appears as [---] on the screen.
• When you set the date print setting by pressing the [DISPLAY] button, the date is
printed regardless of the date print setting on DPOF setting. (P82)
• If the printer does not support the date printing by DPOF setting, the date may not
be printed as it is on date setting in DPOF setting.
• The setting on the printer may have priority over the setting on the camera in the
date print. Also check the date print setting on the printer.
SET SELECT
DIRECT PRINT
SINGLE
PICTURE DPOF
PICTURE
SET
REVIEW
WB
SET
REVIEW
WB
PLS CHECK THE PRINTER
START PRINTING?
DATE DISPLAY
SELECT SET
YES NO
DIRECT PRINT
SET
REVIEW
WB
SET
REVIEW
WB
FX5_FX1-PP.book 103 ページ ２００３年１２月１５日 月曜日 午後１時２７分