Panasonic WORKIO C213 - Manual (Page 89)

89
Chapter 3 Other Features
Manual Skyshot Mode
Copying with pre-registered scan size into memory.
z
Before using the Manual Skyshot Mode, please set M1 or M2 in the preset jobs. Refer to the Copier Settings
in the Operating Instructions (For Function Parameters) on the provided CD-ROM.
z
Originals with black borders may not be copied properly.
z
If Manual Skyshot Mode is selected in “Sort”, “Shift-Sort”, “Rotate-Sort”, “Staple-Sort”, “Shift-Group” or
“Rotate-Group”, the setting is automatically changed to “Non Sort”.
1
Open the ADF, and then place the
original on the Platen Glass, leaving it
open.
z Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
3
Select copy features if necessary.
4
Select “Preset Jobs” on the Basic
Menu screen.
5
Select the original size from either
“M1:” or “M2:”.
6
Enter the desired number of copies.
7
Press the Start key.
z
Place the next original, and then follow the
instructions described on the touch panel
display.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.