Panasonic SC-AK320 EN - Manual (Page 6)

RQT7330
6
4
AC power supply cord
Note
The included AC power supply cord
is for use with this unit only.
Do not use it with other equipment.
For your reference
To save power when the unit is not
to be used for a long time, unplug it
from the household AC outlet.
You will need to reset some memory
items after plugging in the unit.
2
AM loop antenna
Stand the antenna up
on its base.
(R) (L)
1
FM indoor antenna
Adhesive tape
Affix where
reception is best.
Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
3
Speaker cords
Use only the supplied speakers.
The combination of the main unit and speakers provide the best sound.
Using other speakers can damage the unit and sound quality will be
negatively affected.
Caution
• Use the speakers only with the recommended
system. Failure to do so may lead to damage
to the amplifier and/or the speakers, and may
result in the risk of fire. Consult a qualified
service person if damage has occurred or if
you experience a sudden change in
performance.
• Do not attach these speakers to walls or
ceilings.
The illustrations show SC-AK520.
AK320
Red (+)
Blue (–)
Gray (+)
Black
Blue
Red
Gray
Black (–)
2
1
3
Connect the left (L) side
in the same way.
-
1
3
Connect the left (L) side
in the same way.
Blue (–)
Gray (+)
Red (+)
(SB-WAK520)
Subwoofer
Red
Red
Gray
Black
Blue
Black (–)
Black
Red (+)
Black (–)
AK323
AK520 AK523