Using the auto review – Panasonic DMC-FZ1PP User Manual
Page 78
Technical use
78
Using the Auto Review
Recording with the auto review set to
[1 SEC.]/[3 SEC.], the recorded picture is
automatically displayed on the LCD monitor/
Viewfinder for about 1or 3 seconds.
[Preparation]
• Set the mode dial except for [
]/[
]. (P25)
1
Press the [MENU] button.
2
Press
1 to open the setup menu.
3
Press
3/4 to select [AUTO REVIEW].
4
Press
2/1 to select [1 SEC.] or
[3 SEC.].
5
Press the [MENU] button.
• The menu will disappear.
• Even when setting the auto review to [1 SEC.]/[3 SEC.], it is not available in motion image
mode [
].
• When recording in burst mode, auto bracket, still picture with audio modes, the recorded
picture is automatically displayed.
• In simple mode [
], the auto review setting becomes [ON] (1 second) or [OFF].
1,5
2,3,4
BEEP
SETUP 1/2
SELECT
SET
EXIT
MENU
REC
MONITOR
AUTO REVIEW
OFF
1 SEC.
3 SEC.
POWER SAVE
3,4