Panasonic MN101C00 - Manual (Page 91)

4-5 Time Base Operation
4-5-1 Overview
The clock source for the time base timer can be set to fosc or fx. Also, the interrupt
period for time base timer (TBIRQ) can be set to 1/2 7 , 1/2 8 , 1/2 9 , 1/2 10 , or 1/2 13 of the
clock source.
4-5-2 Operation
■ Time Base Function
Settings for the time base function are listed below.
(1) Use the TM5CK0 flag of the timer 5 mode register (TM5MD) to select fosc or fx as
the clock source.
(2) Use the TM5IR2 to 0 flags of the TM5MD register to select the time base timer
interrupt source.
(3) When the selected time interval passes, the interrupt request flag of the time base
interrupt control register (TBICR) is set.
Table 4-5-1 Base Time Settings
Chapter 4 Timer Functions
77
TM5IR2 to 0
Clock Source
fosc
20MHz
8.38MHz
32.768kHz
6.4 µ s
15.2 µ s
3.9ms
12.8 µ s
30.5 µ s
7.8ms
25.6 µ s
61.0 µ s
15.6ms
51.2 µ s
122.0 µ s
31.2ms
409.6 µ s
000 001 010 011 1XX
1
2 7
1
2 8
1
2 9
1
2 10
1
2 13
976.4 µ s
250ms fx
Time base operation cannot be halted.
Time Base Operation