Bosch 718 - Manual (Page 26)

You have the option of diverting all calls or
choosing to divert incoming calls only if un-
answered. The unanswered calls option diverts
calls
– if you are busy
– if you do not reply
– if there is no contact
Registration
To enable a call divert you must register it first.
You will be asked to specify whether you want
the call divert function to apply to all services,
speech, data services, fax services or mes-
sage services (SMS).
Deactivation/activation
You may not be able to make use of the deactiv-
ate and activate options. In that case you must
cancel a call diversion by selecting
Cancel.
Next time you want your incoming calls diverted,
select
Register .
Calls can be diverted to a telephone number
stored in your phone book or to any other num-
ber. Access your phone book by pressing
or
enter a phone number via the keypad.
If you have chosen to have all calls diverted, the
call divert indicator
will be visible on the
standby display.
If you wish to suspend your calls being diverted
for a time, select
Deactivate . All registra-
tions will remain in the network, so next time
you wish to divert your calls to the same number,
simply select
Activate .
Validity time
If you have selected
Divert if unanswered
or
Divert if no reply
you can specify that a period of time must elapse
before the call is diverted. This period can be
from 5 to 30 seconds at intervals of 5 seconds.
It is always possible to see the status of the
activated call diversions by selecting
Status .
Registered call diversions can be cancelled
individually or can all be cancelled at once by
selecting
Cancel all .
CALL DIVERT
26
User Guide 738/718 GB 29/04/99 9:59 Side 26