Polaroid Freescape 20071016 - Manual (Page 38)

38
Title: PO_10664_MPU Manual_UK Language: English FI No.: 10664 Date: 22/11/07 Page: 38 Titl
Selecting the proper TV Mode
The Polaroid PMP supports both PAL and NTSC TVs. This setting is
found by navigating through the menu levels:
Extras -> Setup -> Settings -> Display -> TV Mode
The selected setting is saved for future use .
Enabling TV Out Mode
At most any time, the LCD image can be sent to the TV by pressing the
MENU soft key, scrolling to and selecting the TV Out On option. The
PMP LCD will go dark and the display redirected to the TV. Device
operation remains exactly the same with the image on the TV.
Exiting TV Out Mode
Pressing the power button will cancel the TV output and return the
display to the device LCD. The display can be alternated between the
TV and LCD at will by following the Enable and Exit procedures
Optimizing Your TV Screen
Your TV brightness, contrast and sharpness controls may require
adjustment to deliver the best picture from your PMP. Photos and
videos can be zoomed or stretched to fi ll the screen. This can be done
by certain TVs or on the PMP itself.
See the Picture Viewer or Video Player sections for these screen control
options.
TV Out