Panasonic AK-HC930P - Manual (Page 26)

26
Setting menu configuration
Painting
Color Correct1
Matrix adjustments
Matrix adjustments
DTL adjustments
DTL adjustments
SKIN tone DTL adjustments
G SAT (for adjusting the Green gain)
G PHASE (for adjusting the Green phase)
Color Correct2
DTL1 V DTL LEVEL (for adjusting the V DTL)
HDTL (for adjusting the H.DTL)
DTL2
CRISP (for adjusting the DTL crisp level)
PeakFRQ (for selecting the DTL peak frequency)
DTL-Source (for selecting the DTL source)
KNEE DTL SW (for setting the knee DTL)
SKIN DTL 1 SKIN Detail (for setting the skin tone detail level)
KNEE DTL GAIN (for adjusting the knee DTL gain)
2D LPF (for setting the 2D LPF)
LEVEL DEP (for adjusting the level dependent)
DARK DTL (for adjusting the dark DTL)
DTL CLIP+ (for adjusting the clip on the DTL + side)
DTL CLIP— (for adjusting the clip on the DTL — side)
DTL COMP+ (for adjusting the compensation on the DTL + side)
DTL COMP— (for adjusting the compensation on the DTL — side)
CORNER DTL (for setting the corner DTL)
AREA SAT (for setting the skin tone area chroma)
SKIN CRISP (for adjusting the skin tone detail crisp)
AREA WIDTH (for setting the skin tone area width)
AREA PHASE (for setting the skintone area phase)
AREA Ymax (for setting the skin tone area brightness MAX)
AREA Ymin (for setting the skin tone area brightness MIN)
AREA SLOPE (for setting the skin tone area edge slope)
G_Cy SAT (for adjusting the G_Cy gain)
G_Cy PHASE (for adjusting the G-Cy phase)
Cy SAT (for adjusting the Cy gain)
Cy PHASE (for adjusting the Cy phase)
Cy_B SAT (for adjusting the Cy_B gain)
Cy_B PHASE (for adjusting the Cy_B phase)
B SAT (for adjusting the B gain)
B PHASE (for adjusting the B phase)
B_Mg SAT (for adjusting the B_Mg gain)
B_Mg PHASE (for adjusting the B_Mg phase)
Mg SAT (for adjusting the Mg gain)
Mg PHASE (for adjusting the Mg phase)
Mg_R SAT (for adjusting the Mg_R gain)
Mg_R PHASE (for adjusting the Mg_R phase)
R SAT (for adjusting the R gain)
R PHASE (for adjusting the R phase)
R_Ye SAT (for adjusting the R-Ye gain)
R_Ye PHASE (for adjusting the R_Ye phase)
Ye SAT (for adjusting the Ye gain)
Ye PHASE (for adjusting the Ye phase)
Ye_G SAT (for adjusting the Ye_G gain)
Ye_G PHASE (for adjusting the Ye_G phase)
Hierarchical menus
Maintenance
Date/Time
Camera s internal calendar function settings
SD CARD
SD card operations with
the camera
FORM CONV
Camera s built-in down-
converter settings
MODE (for selecting the format, load or storage mode)
FILE No (for setting the file number to be used)
EXECUTE (for executing card operations)
MODE (for setting the down-converter mode)
Iris Cont Auto Iris
Window Select
Iris Level
Pear/Ratio
A.Iris Range (for setting the range of adjusting fine auto iris level with iris volume joystick)
A.Iris Speed (for setting the auto iris speed)
Scene Fine FILE SEL (for selecting scene files)
Load (for loading scene files)
Store (for storing scene files)