Panasonic DVD-RV60 98RV1 - Manual (Page 9)

3.3 - Securing KeyMaster.
Before fastening the KeyMaster the wires have to be fixed with a
cable tie. Use the cable tie as shown on fig. 9. Fix the wires so they
are not located underneath the chassis of the mechanism.
Fig. 9
Note: the picture shows a Panasonic DVD-RV60.
Secure the KeyMaster onto the mechanism chassis as shown on
fig. 9. Remove the protection film from the double sided tape and
press the KeyMaster thoroughly towards the chassis.
In Panasonic SA-PM08 the KeyMasteren has to be sercured as
shown in Fig. 10.
Fig. 10