Panasonic CF-VDM292U - Manual (Page 7)

7
E
Using the Drive
Refer to “Multimedia Pocket” in the Reference Manual included with your computer for
details on how to install and remove the drive.
Installing/Removing a Device
Preparations
Windows XP
Confirm that [Transfer Mode] is set to [DMA if available] in [start] - [Control Panel] -
[Performance and Maintenance] - [System] - [Hardware] - [Device Manager] - [IDE ATA/
ATAPI controllers] - [Secondary IDE Channel] - [Advanced Settings] - [Device 0]. Per-
form this setting if it has not yet been made.
Windows 2000
Confirm that [Transfer Mode] is set to [DMA if available] in [Start] - [Settings] - [Control
Panel] - [System] - [Hardware] - [Device Manager] - [IDE ATA/ATAPI controllers] -
[Secondary IDE Channel] - [Advanced Settings] - [Device 0]. Perform this setting if it has
not yet been made.